BRTP06ISS0PC IMM Robot for 30T-150T Injection Molding Machines
- Model
- BRTP06ISS0PC
Item specifics
- Control System
- HC Control System
- Color(General)
- white
- Loading Ability
- 2kg
- Repeated Positioning accuracy
- ±0.05mm
- Recommended I.M.M(Ton)
- 30T-150T
- Power Supply
- 220V
Review
Description
BRTP06ISS0PC Injection Molding Robot Product Features

BRTP06ISS0PC SWING-ARM SERVO MANIPULATOR
BRTP06ISS0PC series appliesto all types of horizontal injection machines of 30T-150T for take-out products.The up and down arm is a single/double sectional type.The up and down action,drawing part,screwing out,and screwing in of them is driven by air pressure,with high speed and high efficiency.After installing this robot,productivity will be increased by 10-30% and will reduce the defective rate of products,ensure the safety of operators,reduce manpower and accurately control the output toreduce waste.
Main Specification
| Model: | BRTP06ISS0PC | ||
| Recommended I.M.M: | 30T-150T | ||
| Traverser Driven: | Driven by cylinder | ||
| Model of EOAT: | Zero suctions Zero fixtures | ||
Traverse Stroke: | / | ||
Crosswise Stroke: | 120mm | ||
Vertical Stroke: | 650mm | ||
Max.loading: | 2kg | ||
Dry Take Out Time: | 1.6s | ||
Dry Cycle Time: | 5.5s | ||
Swing Angle: | 30-90° | ||
Air Consumption(NL/cycle): | 3 | ||
Repeatability: | ±0.05mm | ||
Power source: | 0.05kVA | ||
Weight: | 36kg | ||
Application scenarios: | Injection molding industry |
No further notice if the specification and appearance are changed due to improvement and other reasons.
Thank you for your understanding.






